Home Technical Discussions BMW E46 3 Series 1999 -2004 (323i, 325i/xi, 328i,...

BMW E46 3 Series 1999 -2004 (323i, 325i/xi, 328i, 330i/xi, M3, conv, sport wagon) code 1352 misfire during start cylinder 6


Permlink Replies: 3 - Pages: 1
Last Post: Sep 25, 2013 9:58 AM Last Post By: Cheway96
rramitosc

Posts: 1
Registered: 04/16/12
code 1352 misfire during start cylinder 6
Posted: Apr 16, 2012 2:45 PM
  Click to reply to this thread Reply
Hi evryone with bimers E46 i have a 03 325 I with this problem code 1352 misfire at cylinder 6 at staring after is warm car runs good, any ideas please thanks and regards

Edited by: rramitosc on Apr 16, 2012 2:46 PM
felix2

Posts: 290
Registered: 02/12/04
Re: code 1352 misfire during start cylinder 6
Posted: Apr 16, 2012 3:50 PM   in response to: rramitosc in response to: rramitosc
  Click to reply to this thread Reply
Could be a coil or spark plug issue. How old are the plugs? Swap coil 6 with one from another cylinder and see if the fault code changes.
Cheway96

Posts: 2
Registered: 09/25/13
Re: code 1352 misfire during start cylinder 6
Posted: Sep 25, 2013 9:57 AM   in response to: felix2 in response to: felix2
  Click to reply to this thread Reply
Hi, I have the same problem with my 03 325 IT Wagon. When its cold and you start the car, after 60 seconds the car will misfire on 2 or 3 cylinders (engine begins to shake). I have to accelerate until the engine temp goes up in order to avoid the misfires..

I need help!!
Cheway96

Posts: 2
Registered: 09/25/13
Re: code 1352 misfire during start cylinder 6
Posted: Sep 25, 2013 9:58 AM   in response to: Cheway96 in response to: Cheway96
  Click to reply to this thread Reply
FYI, I already replaced all ignition coils... : (

Point your RSS reader here for a feed of the latest messages in all forums

Popular Discussions:
BMW E46 3 Series 1999 -2004 (323i, 325i/xi, 328i, 330i/xi, M3, conv, sport wagon)
P1152 and P1135 Error Codes, 325ci 2001
E46 3 Series 1999 -2004 (323i, 325i/xi, 328i, 330i/xi, M3, conv, sport wagon)