Getting desperate here as it's almost time to hit the road and our dealer doesn't know the V10. This code appeared during one of my periodic VCDS scans. The motor does seem to crank a fraction of a second longer now but still runs fine.

Why doesn't this code appear in my Bentley? Can't find the accompanying Pcode (P3007) either. Seems ironic that my old (95) Audi Bentley has more troubleshooting info and repair pages than the Touareg manual.

So far I've replaced the main battery and wiggled the connectors I can reach. Unfortunately the sensor is out of reach on the back of the engine and changing probably requires engine removal.

Any help appreciated!

lg

Address 01: Engine Labels: None
Part No SW: 070 906 016 CQ HW: 028 101 196 2
Component: V10 5,0L EDCG000AGMª8472
Revision: --H02--- Serial number: VWZ3Z0F6455356
Coding: 0060575
Shop #: WSC 31414 000 00000

1 Fault Found:
012295 - Camshaft Position Sensor (G40): No Signal
P3007 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00110000
Fault Priority: 0
Fault Frequency: 15
Mileage: 65871 km
Time Indication: 0

Freeze Frame:
RPM: 189 /min
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 10.03 V
Bin. Bits: 00001011
Idle Stabilization: 0.0°KW
(no units): 32.0

Readiness: 0 0 0 0 0