Home Technical Discussions Audi 5000: 1977-1983 (C2)

Audi 5000: 1977-1983 (C2) distributor on 1982 audi 5000s


Permlink Replies: 1 - Pages: 1
Last Post: Dec 28, 2006 5:16 PM Last Post By: AUDITECH1
Kantfixit

Posts: 1
Registered: 12/23/06
distributor on 1982 audi 5000s
Posted: Dec 23, 2006 3:26 PM
  Click to reply to this thread Reply
I have some wires broken that come out of the distributor, and in order to fix them I have to remove the metal cap in the distributor to get to the wires underneath. I have removed the snap ring but the cap won't budge....;;HELP.
AUDITECH1

Posts: 27
Registered: 01/29/04
Re: distributor on 1982 audi 5000s
Posted: Dec 28, 2006 5:16 PM   in response to: Kantfixit in response to: Kantfixit
  Click to reply to this thread Reply
the wires that are broken go to the hall sender and almost impossible to fix.the metal cover is the trigger wheel,and will require special tool #3163 to remove,it is a small puller.as the hall sender will probably have to be replaced, the wheel comes with the kit.you might be able to pry it off,but in the end you might be better off finding a used distributor

Point your RSS reader here for a feed of the latest messages in all forums

Related Products
Popular Discussions:
No popular dicussions.