Home Technical Discussions Volkswagen EuroVan: 1992-2003 (T4)

Volkswagen EuroVan: 1992-2003 (T4) 97 EVC Alignment after leveling kit installation


Permlink Replies: 0 - Pages: 1
vw-eurovan

Posts: 52
Registered: 12/18/06
97 EVC Alignment after leveling kit installation
Posted: Feb 4, 2012 9:47 PM
  Click to reply to this thread Reply
So I installed a Go Westy Levelling kit on my 97 EVC. New shocks, rear spring spacers and 16 in rims & tires. I raised and leveled the front end and now it's time to align it. The problem is I'm in Austin and nobody has done a Eurovan alignment before. The VW dealer won't do it and the only shop I can find that is willing to do it has never done one before. Can anyone offer some advise that I can pass on to the shop? I have heard that it is a pain to do.

How do you adjust the camber on the rear or is the spec there only for a check?
Do I give them the factory specs for the alignment?
The rear axle toe adjustment appears to be the inner control arm bolt, but it's not immediately clear to me, is it the inner one?

Thanks for any advise.
Steve.

Point your RSS reader here for a feed of the latest messages in all forums

Popular Discussions:
No popular dicussions.