Home Technical Discussions Audi TT 2000-2006

Audi TT 2000-2006 overboost!.... THIS IS MY FIRST SCAN REPORT:D


Permlink Replies: 1 - Pages: 1
Last Post: Nov 9, 2009 10:25 PM Last Post By: Bresha
Ayoube

Posts: 2
Registered: 11/07/09
overboost!.... THIS IS MY FIRST SCAN REPORT:D
Posted: Nov 8, 2009 3:30 PM
  Click to reply to this thread Reply
GREETINGS

i attached my first scan file and i need to know what i can do to resolve this problems.btw how about some tips/hints to get familiar with this software for my hardware

Best regards

U.B

p.s: yes i am newbie ,weren't you

VCDS Version: Release 908.1
Data version: 20091018

Sunday,08,November,2009,16:59:37:35448

Chassis Type: 8N - Audi TT
Scan: 01 02 03 08 15 17 22 35 37 45 55 56 76 77
Address 01: Engine Labels: Redir Fail!
Part No: 8N0 906 018 AH
Component: 1.8L R4/5VT G 0004
Coding: 26710
Shop #: WSC 00710
TRUWT28N021011130 AUZ5Z0A8070009

3 Faults Found:
17963 - Charge Pressure: Maximum Limit Exceeded
P1555 - 35-10 - - - Intermittent
18010 - Power Supply Terminal 30: Voltage too Low
P1602 - 35-10 - - - Intermittent
16487 - Mass Air Flow Sensor (G70): Signal too High
P0103 - 35-10 - - - Intermittent
Readiness: 0000 0001

Address 35: Centr. Locks Labels: 8Nx-962-267.lbl
Part No: 8N8 962 267 A
Component: Central Lock/Alarm D06
Coding: 06730
Shop #: WSC 00710

1 Fault Found:
01370 - Alarm triggered by Interior Monitoring
35-00 - -
Address 45: Inter. Monitor Labels: 8E0-951-177.lbl
Part No: 8N8 951 177
Component: Innenraumueberw. D09
Coding: 00001
Shop #: WSC 00000

No fault code found.

Address 56: Radio Labels: 8E0-035-1xx-56.lbl
Part No: 4B0 035 152 C
Component: chorus II GRO 0008
Coding: 00002
Shop #: WSC 01236

No fault code found.

End
Bresha

Posts: 433
Registered: 02/23/09
Re: overboost!.... THIS IS MY FIRST SCAN REPORT:D
Posted: Nov 9, 2009 10:23 PM   in response to: Ayoube in response to: Ayoube
  Click to reply to this thread Reply
Mr. Newbie,
tell us about problem with your vehicle, according VIN it's an 02 Audi TT, does it have sufficient power? (P1555 - charge pressure limit) does the check engine light came on? MAF sensor fault P0103 indicate circuitry problem but at this point i would cancel all codes and go for the test drive and check what fault codes will return and go from there. Your scanner is capable of component activation and it will make easier to diagnosis some systems. Good luck.

Bresha

P.S.
Disregard fault code in central locking, just erase the codes.

Edited by: Bresha on Nov 9, 2009 10:24 PM

Point your RSS reader here for a feed of the latest messages in all forums

Popular Discussions:
No popular dicussions.