Home Technical Discussions Audi TT 2008 and later (8J)

Audi TT 2008 and later (8J) 08 TT fuel door removal


Permlink Replies: 9 - Pages: 1 Threads: [ Previous | Next ]
Last Post: Jun 29, 2019 8:19 AM Last Post By: bella789
tkinser

Posts: 1
Registered: 01/28/08
08 TT fuel door removal
Posted: Jun 24, 2009 4:25 PM
  Click to reply to this thread Reply
can anyone explain how the fuel door assy can be removed for painting purposes.
FKH161

Posts: 7,661
Registered: 12/29/05
Re: 08 TT fuel door removal
Posted: Jun 25, 2009 9:18 PM   in response to: tkinser in response to: tkinser
  Click to reply to this thread Reply
eBahn software shows 3 screws for the fuel door asembly... remove
3 screws, lift door assembly out & detach cable via 2 screws.

For more info:

eBahn TT (8J) software:
http://downloads.bentleypublishers.com/iso/Setup-AUDI-8J.exe

Pay the 1 time activation fee here:
http://www.bentleypublishers.com/shopcart.htm?action=add&code=a8jx
Garlic

Posts: 1
Registered: 07/02/09
Re: 08 TT fuel door removal
Posted: Jul 8, 2009 6:46 PM   in response to: FKH161 in response to: FKH161
  Click to reply to this thread Reply
OK I have removed the 3 screws and find that the fuel door is very resistant to want to come out and at around $300 and some dollars to replace, I am at a standstill. I realize that it has buytle between it and the body panel however that is not what is holding it. Any suggestions. Thank You!!
FKH161

Posts: 7,661
Registered: 12/29/05
Re: 08 TT fuel door removal
Posted: Jul 8, 2009 9:17 PM   in response to: Garlic in response to: Garlic
  Click to reply to this thread Reply
Attachment TTfillerDoor.jpg (43.8 KB)
Never had one out... just going by what the Bentley CD
has to offer (see attached image).

Does this even look like your setup?
Bresha

Posts: 433
Registered: 02/23/09
Re: 08 TT fuel door removal
Posted: Jul 9, 2009 1:23 AM   in response to: Garlic in response to: Garlic
  Click to reply to this thread Reply
Remove screws, remove clip for actuator cable, push in cable assembly, remove gas cap, pry out at the actuator cable side and whole assembly should come out. Refer to previously added attached image.

Bresha

Message was edited by: Bresha

FKH161

Posts: 7,661
Registered: 12/29/05
Re: 08 TT fuel door removal
Posted: Jul 9, 2009 1:33 AM   in response to: Bresha in response to: Bresha
  Click to reply to this thread Reply
Thanks for the added info Miro!
Bresha

Posts: 433
Registered: 02/23/09
Re: 08 TT fuel door removal
Posted: Jul 9, 2009 1:42 AM   in response to: FKH161 in response to: FKH161
  Click to reply to this thread Reply
To FKH161.
You are still awake? How is the business?

Miron
FKH161

Posts: 7,661
Registered: 12/29/05
Re: 08 TT fuel door removal
Posted: Jul 9, 2009 1:53 AM   in response to: Bresha in response to: Bresha
  Click to reply to this thread Reply
Not too bad... weather is nice and cool which helps. You
must be sweating a lot in CA, no?
Bresha

Posts: 433
Registered: 02/23/09
Re: 08 TT fuel door removal
Posted: Jul 9, 2009 2:08 AM   in response to: FKH161 in response to: FKH161
  Click to reply to this thread Reply
Daily about 78 to 87 deg/F, night about 59 deg/F not bad, not sweating, and Redwood City is: climate best as per government test, at least they did not make any mistake about the climate, they telling the truth.
Texas is terrible i heard, to hot.

Miron
bella789

Posts: 8
Registered: 06/20/19
Re: 08 TT fuel door removal
Posted: Jun 29, 2019 8:19 AM   in response to: tkinser in response to: tkinser
  Click to reply to this thread Reply
I think the fuel tank doors are able to remove and paint best shared hosting. I am not having proper details about it but also I think that there will be a choice to paint it properly. Because the painting is essential for the tank.

Point your RSS reader here for a feed of the latest messages in all forums

Popular Discussions:
No popular dicussions.