Home Technical Discussions AUDITECH1

 
User Profile for AUDITECH1
AUDITECH1
   
 
Registered: Jan 29, 2004
Total Posts: 27
Location Ga
Occupation Technician
Homepage
Biography 30+years as VW/Audi Tech


Recent Messages: Point your RSS reader here for a feed of the latest messages in all forums
FAULT CODE 1999 CAMSHAFT ADJUSTER,HIGH FRICTION
 
I am working on an A-4 cab with a 3.0. I'm getting a fault code P1999 camshaft adjuster,high frictio...
Code 16396 Cam A advance set point not reached
 
I'm working on a '02 Passat with a 1.8t awm.I'm getting a 16396 code,cam A advance setpoint not reac...
Re: 99 Passat wagon door locks
 
I found the problem with the door lock system.the power supply wire from fuse 228(starts out red/yel...
99 Passat wagon door locks
 
I'm working on a 99 Passat wagon.When locking the doors either manually or with the remote,the R.F.,...
Re: Can I disable the alarm system?
 
I have ran into a problem with the solder joints coming loose in the drivers door lock module.the pr...
A4 trans shudder from stop
 
i am working on a 99 A4Q that will shudder briefly from a stop in forword or reverse when cold. it o...
Re: 2000 A6 avant ATQ motor P0300 and P0304
 
your'e exactly right Lou,NEVER put any thing other than the NGK BKR6EKUB in that model V-6. also the...
Re: 95 CABRIO,NO HEAT
 
Thanks FKH161,for your replies,because this is my wives car and I plan on keeping for awhile I did t...
Re: No heat
 
with the engine running pull back hose #3 so that water comes out of the small hole in the hose,just...
Re: POWER WINDOWS WORK BY THEMSELVES
 
IF ANYONE IS INTERESTED,THE PROBLEM WITH THE WINDOWS WAS A BROKEN GROUND WIRE BEHIND THE DEAD PEDEL ...